woopowoopo
tools
free tool

guitar tuner

Tune your guitar, bass or ukulele with your mic, free, to within a cent or two, with nothing recorded.

-
then play one string at a time
auto picks the closest string · tap a peg to hear it or lock it

a tuner that behaves like the app you already like

Press start and play one string at a time. The tuner hears which string it is, the needle swings to how sharp or flat you are, and the note circle fills in when you land inside five cents, with a little blip once you hold it there. Every peg on the headstock is tappable: hear a reference pluck, or lock the tuner to that string when the auto pick guesses wrong on a very detuned instrument or when you tune with 12th-fret harmonics.

Tunings cover standard, drop D, half and full step down, drop C, DADGAD, open G, D and E, four and five string bass, and three ukulele tunings, plus a chromatic mode for anything else. The pitch engine is the same detector as the vocal pitch monitor, running on the raw mic signal. In guitar mode it listens down to just under B1, and to A1 in drop C, so a low string still in drop C reads in every tuning and drop C's low C reads at any A4 setting from 400 to 480, and it matches each string across the stretch it moves through between standard and your tuning, so a low E on its way to drop D says tune down and never passes for the high E. Nothing is recorded or uploaded.

common questions

is an online guitar tuner accurate?

Yes. On one clean plucked string it reads within a cent or two. Accuracy depends on a clean signal: pluck one string, let it ring, keep the other strings quiet, and tune with effects like delay or flanger switched off, since they can make it read an octave off. If the reading jumps between strings, tap that string's peg to lock it.

how do I tune a guitar by ear with this?

Tap a peg to hear the reference pluck, then play your string and match it. The needle tells you which way to turn: right of center means tune down, left means tune up.

does it do drop D and half step down?

Yes. Pick the tuning from the menu and the pegs update to the new notes. Each guitar string is matched across the whole stretch it moves through between standard and the new note, so in drop D the low E reads as D, tune down, from the first pluck. Drop D, drop C, half step down, full step down (D standard), DADGAD, open G, open D and open E are all included, plus bass and ukulele.

why does it show the wrong string?

Auto mode matches each string anywhere between its standard pitch and its note in your tuning, and a pitch outside all of those goes to the nearest string. So a string tuned past its note can register as its neighbor, and the arrow is then wrong for it: in standard and drop D that takes 2 semitones or more, in half step down, open G and open E 1.5 semitones, and in full step down, drop C, DADGAD and open D 1 semitone. In auto mode 12th-fret harmonics can register as other strings too: on the three low strings, and on the G string when it is tuned down (half step down, full step down, drop C and open D). To tune with harmonics, or whenever the reading jumps, tap the peg of the string you are tuning to lock it: a locked string reads in any octave, harmonics included. Tap again to go back to auto.

will mains hum show up as a note?

No. Hum sits at 50 or 60 Hz, right where a low string tuned down to C or B can be, so within about 60 cents of those two pitches a reading only shows once the sound rings out the way a plucked string does, getting quieter and darker together, and it stops when you mute the string or it fades into the hum. Hum does not ring out, whether it holds steady, swells, wobbles or comes in with the click of a cable. A string that low (drop C with A4 set below about 418, or at A4 440 a low string tuned down to B or B flat) shows from about half a second after each pluck, while it rings out. With hum nearly as loud as the string, pluck a little harder or move away from whatever is humming.

more free tools