woopowoopo
tools
free tool

mic test

Test your microphone online in seconds: live levels, waveform and playback, nothing leaves your device.

test your microphone

Live waveform, level meter and honest quality checks. Your voice never leaves this device.

check your microphone before it matters

Whether it is a stream, a call, a podcast or a vocal take, the worst time to find out the mic is wrong is afterwards. This test shows a live waveform and level meter, flags clipping, low level and a noisy background, lets you pick between input devices, and records a clip so you can hear yourself the way others do.

Everything runs in your browser. Your voice is never uploaded, stored or sent anywhere.

mic not detected?

windows 11

Open Settings, Privacy & security, Microphone, and turn on Microphone access, Let apps access your microphone and Let desktop apps access your microphone (your browser counts as a desktop app). Then open Settings, System, Sound, and under Input pick the mic you want and make sure its volume is not near zero. If a USB mic is missing from the list, unplug it and plug it into another port.

macOS

Open System Settings, Privacy & Security, Microphone, and turn on the switch for your browser. If the browser was open while you changed it, quit it and open it again. Then go to System Settings, Sound, Input, select your mic and raise the input volume if the bars barely move.

chrome and edge

Click Allow when the page asks. If you blocked it earlier, click the icon at the left of the address bar, set Microphone to Allow and reload the page. Chrome keeps the full list in Settings, Privacy and security, Site settings, Microphone, where you can also choose which mic it uses by default. Edge has the same switch under Settings, Cookies and site permissions.

safari

On a Mac, open Safari, Settings, Websites, Microphone and set woopo.app to Allow or Ask. On iPhone and iPad, open the Settings app, find Safari and set Microphone to Allow or Ask, then reload this page.

firefox

Click the permissions icon in the address bar, clear the blocked microphone permission, reload and press start again.

mic works here but not in your app

discord

Open User Settings, Voice & Video, and set Input Device to the same mic that works here. Check Input Volume, then run Discord's own mic test on that page. If people say you cut out between words, turn off automatic input sensitivity and drag the slider lower, or switch to Push to Talk.

zoom

Open Settings, Audio, pick your mic under Microphone and press Test Mic. If your level keeps jumping up and down, turn off Automatically adjust microphone volume and set it by hand.

obs

Open Settings, Audio and choose your mic under Mic/Auxiliary Audio, or add an Audio Input Capture source to your scene. Talk and watch its meter in the Audio Mixer: if it does not move, OBS is listening to the wrong device.

when one app takes the mic

On Windows, an app can grab the mic so nothing else hears it. Close the other apps that use it, or open Settings, System, Sound, More sound settings, Recording, your mic, Properties, Advanced, and untick Allow applications to take exclusive control of this device.

usb, xlr or headset

usb mics

Plug straight into the computer and show up under their own name. The gain knob, if there is one, is on the mic itself, and many have a headphone jack so you can hear yourself with no delay.

xlr mics

Need an audio interface or a mixer, and the interface is what shows up as the input device, not the mic. Condenser mics need 48V phantom power switched on or they make no sound at all. Dynamic mics are quieter and often need the interface's gain turned well up.

headset mics

A single 3.5 mm plug carries the mic and the headphones together. On a computer with separate mic and headphone jacks you need a splitter, or the mic is simply not connected. Bluetooth headsets switch to a lower quality call mode while their mic is on, which is why they sound muffled on calls.

what good levels look like

speaking level

Talk the way you really will, a hand's width or two from the mic. Peaks around -12 dBFS are a comfortable target, and anywhere from about -18 to -6 is fine. Much lower and people have to turn you up along with the room noise; higher leaves no room for a laugh or a shout.

no clipping

0 dBFS is the ceiling. Anything that hits it gets flattened, sounds harsh or crackly, and cannot be fixed afterwards. When the clipping warning shows, turn the gain down at the source: on the mic or the interface, or the system input volume for a USB or laptop mic.

background noise

In the pauses the level should fall well below -50 dBFS. If it stays above that, the noisy warning shows: listen back for fans, hum or traffic, move the mic closer to your mouth and away from the computer, and lower the gain a little. For a recording that is already noisy, try noise reduction.

common questions

how do I test if my mic is working?

Hit start, allow the microphone, and speak. If the waveform moves and the meter reacts, the mic works. Record and play back to hear exactly what other people hear, which catches problems a meter cannot, like a muffled or distant sound.

why is my mic so quiet?

Usually one of four things: the input volume is turned down in Windows or macOS sound settings, the wrong mic is selected (often a webcam or laptop mic instead of your headset), you are too far away, or an XLR mic needs more gain on the interface. Pick the right device in the list above, get within a hand's width or two, and raise the gain until your peaks reach about -12 dBFS.

why does my mic sound distorted or crackly?

If the clipping warning shows and the peaks hit 0 dBFS, the input gain is too high: turn it down on the mic or the interface. If the level looks fine but it still crackles, try another USB port or cable, close other apps that use the mic, and on Bluetooth headsets expect a muffled call quality sound whenever the mic is on.

how do I test my mic on my phone?

Open this page in Safari or Chrome on the phone, tap start and allow the microphone. Speak, then record a few seconds and play it back. If you blocked it before, on iPhone open the Settings app, find Safari (or Chrome) and set Microphone to Allow or Ask; on Android tap the icon left of the address bar and allow the microphone under permissions.

my mic works here but not in Discord or Zoom, why?

The app is listening to a different input. Each app keeps its own choice, and Default may point at a device you are not using. Set the same mic you picked here in the app's audio or voice settings, then use the app's own mic test.

why does my mic sound different here than on calls?

This test turns off the browser's noise suppression, echo cancellation and automatic gain, so you hear the raw mic. Discord, Zoom and most call apps clean the sound up on their side, which can make it quieter, flatter or cut out between words.

what does listen to yourself do?

It routes your mic straight to your output so you can monitor yourself live. Use headphones: on speakers the mic hears its own output and builds into feedback within seconds.

can I download the recording?

Yes. Record a take of up to 10 minutes, play it back, and download it as a wav file.

is this mic test private?

Yes. The audio is analyzed and recorded entirely inside your browser and never leaves your device, which you can verify by loading the page once and then testing with the internet disconnected.

more free tools